基于概率的运载火箭控制系统设计方法研究

针对传统的控制系统极限偏差设计方法导致运载火箭余量大、总体性能下降的问题,综述了基于概率的控制系统设计方法的国内外研究现状,论述了运载火箭控制系统概率设计的基本思想及设计流程,基于概率密度函数建模理论,建立了通过实际控制指令来控制概率密度函数拟合权值的状态空间,并基于最小二乘方法对状态空间中的参数进行了辨识,进而建立了密度函数成型控制模型,提出了基于最优控制理论的运载火箭控制器设计方法,最后通过仿真验证了理论方法的有效性,为我国运载火箭控制系统的精细化设计提供了理论依据。     

导航卫星中断频次的分析方法

面向导航卫星中断频次的定量分析需求,该文分析导航卫星中断产生的主要原因,给出中断频次分析的流程,并针对分析过程中的三个关键问题,研究提出具体实施方法,包括通过相关性分析快速定位底层中断事件,通过中断树建立指标分析模型,并融合在轨数据、地面试验数据快速预估得到底层功能异常率等。最后通过示例进一步说明中断频次分析过程。该文方法已应用于北斗导航卫星工程。     

基于DOA聚类算法的ARM抗有源诱偏技术研究

有源诱偏技术是雷达对抗反辐射导弹的一种重要手段,可以大大降低反辐射导弹的作战效能。为提高对敌目标的精确打击能力,在分析闪烁诱饵诱偏原理的基础上,针对有源诱偏干扰下被动雷达测角精度与稳定度不高的问题,通过对有源诱偏信号的时域特征进行分析,提出一种基于脉冲前沿检测的DOA聚类分选算法,找出前沿超前的辐射源信号,实现了高性能抗有源诱偏干扰和高精度抗干扰测向。仿真结果表明,该技术可以有效对抗四点源有源诱偏干扰。     

PWM低速爬行状态系统波动分析

脉宽调制技术（PWM）在自动控制领域有着广泛的应用。然而，在实际工程应用的过程中，包含PWM的系统在低速驱动的条件下难以达到高精度速度指标的要求。在工程实践经验的基础上，对这一问题进行详细分析，提出PWM的截断效应和移频效应引起波动的理论，并结合典型的机电伺服系统模型进行仿真，完成仿真层面的验证。仿真结果展示了机电伺服系统在低转速状态下由于PWM的截断效应引起转速波动的现象，契合了实际系统中表现的情况，验证了截断效应和移频效应的正确性，为提高系统精度指标提供了依据。     

多机并联火箭羽流流场及其底部热环境分析

For the problem that the plume flow field structure of a multi engine parallel rocket is complicated and the bottom thermal environment is extremely harsh, which may cause the failure of the engine structural components, the plume flow field and thermal environment at different altitudes are studied through numerical simulation. The result is compared with the measured results in flight which shows that when the rocket is flying at a low altitude, the plume of the engines do not interfere with each other. As the flight altitude increases, the plumes gradually expand and begin to interfere with each other, and finally there is an obvious backflow at the bottom of the rocket. The maximum heat flux at the moment of take off is basically the same as the measured value in flight. Before the backflow occurs, the heat flux mainly consists of radiant heat, the convective heat flow increases as the flight altitude grows, but it is also much smaller than the peak heat flow at takeoff. The result has certain guiding significance for the optimal design of engine structure thermal protection.     

Neural adaptive control for a ground experiment of the space proximity operation in a six-degree-of-freedom micro-gravity simulation system

In this study, a neural adaptive controller is developed for a ground experiment with a spacecraft proximity operation. As the water resistance in the experiment is highly nonlinear and can significantly affect the fidelity of the ground experiment, the water resistance must be estimated accurately and compensated using an active force online. For this problem, a novel control algorithm combined with Chebyshev Neural Networks (CNN) and an Active Disturbance Rejection Control (ADRC) is proposed. Specifically, the CNN algorithm is used to estimate the water resistance. The advantage of the CNN estimation is that the coefficients of the approximation can be adaptively changed to minimize the estimation error. Combined with the ADRC algorithm, the total disturbance is compensated in the experiment to improve the fidelity. The dynamic model of the spacecraft proximity maneuver in the experiment is established. The ground experiment of the proximity maneuver that considers an obstacle is provided to verify the efficiency of the proposed controller. The results demonstrate that the proposed method outperforms the pure ADRC method and can achieve close-to-real-time performance for the spacecraft proximity maneuver.     

非恒定增压式微尺度拉瓦尔喷管流动特性

针对微尺度喷流在航天器运动状态切换时出现的非恒定增压变化,采用直接模拟蒙特卡洛(DSMC)方法对阶跃式增压和线性式增压两种模式下的微尺度拉瓦尔喷管流场进行了模拟,并对其变化过程中的流动特性进行了对比分析。结果显示：阶跃式增压会导致流动特性出现较大幅值的峰谷式波动,而线性式增压下的流动特性则呈现出线性变化的特点;黏性力对微尺度喷流的非恒定增压变化产生了重要的黏滞作用,在喉部扩张段至出口的流场中尤为明显;在设定的条件下,阶跃式增压过程中喷流产生的总冲量较线性式增压高59.5%,质量流量高74.7%,单位工质提供的冲量低约8.6%,波动性也高于线性式模型,阶跃式增压适用于系统需要较大推力改变运动状态且推进剂充足的情况,而线性式增压在系统精确微调或需要推进剂产生更高效能时具有明显的优势。     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.     

基于IMU/FADS/无线电的火星上升器组合导航方案

以火星采样返回任务中火星表面上升为背景，研究了基于惯性测量单元（Inertial Measurement Unit, IMU）、嵌入式大气数据传感系统（Flush Air Data Sensing System, FADS）和无线电信标的组合导航方法。首先，在传统的IMU导航框架中加入由无线电测量获得的相对距离、速度信息，以及由FADS获取的动压、温度数据，建立了基于IMU、无线电和FADS的导航观测模型；然后，基于无迹卡尔曼滤波（Unscented Kalman Filter, UKF）技术对测量信息进行了融合，并压制了过程噪声和测量噪声，从而对上升器的状态进行了联合估计；最后，在数值仿真中，将UKF与自适应无迹卡尔曼滤波（Adaptive Unscented Kalman Filter, AUKF）技术进行了对比，在比较不同滤波器性能的同时，验证了组合导航方法的有效性。